www.myirtech.com
MYS-6ULX-IOT |
Product Manual
23
Figure 4-17 Expansion Interface (J3)
4.14 Debug UART
MYS-6ULX-IOT is equipped with a debug UART, which can be used as Linux terminal to
debug the system. A pin header (1x3pins, 2.54mm pitch) has been used for the debug
UART port. The debug UART is 3.3V LVTTL Level standard. Consumers can use it with a
USB to UART (TTL level) cable. MIYR provides suitable cable for selection.For more
detail, please visit
http://www.myirtech.com/list.asp?id=537
.
Figure 4-18 Debug UART