www.hsdonline.co.uk
2 . Safety Thermal Cut-out
The appliance is fitted with a thermal cut-out. Once the tubular heater has cooled
down it will re-set itself automatically.
3. Installing & Operating
the Digital Controlled Tubular Heater
• THE TUBE HEATERS MUST BE MOUNTED HORIZONTALLY NOT VERTICALLY.
Step 1.
• Install the support bracket to the tube heater as shown below using the fixings
supplied.
Step 2.
• Fix the tubular heater to your chosen position to the wall or floor.
Important:
• The heater should have the following distances from walls or between 2 heaters.
Floor Mounting
Wall Mounting Distance between heaters
4
MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 4
