Mylex Disk Array Controller Driver for NetWare 5.0
14
eXtremeRAID DAC1164P Quick Installation Guide
Installing Peripherals Under NetWare 5.0
Non-disk peripheral devices, such as tape or CD-ROM drives, can be
installed on any channel of the controller. Each non-disk device will require
a unique SCSI ID, different from any other non-disk device connected to the
controller regardless of the channel.
1. The NetWare 5.0 NWASPI must be loaded. For example:
: load nwaspi.cdm
☛
Note
NWASPI.CDM must be loaded during startup,
otherwise you will need to copy it from the Novell
distribution CD-ROM.
2. After the nwaspi driver is installed, other appropriate drivers should be
loaded before trying to access the non-disk devices. For example, to
use NetWare's Sbackup utility, do the following:
: load mdac.ham
: load nwaspi
: load tsa500
: load tapedai
: scan for new devices
: load sbackup
Except for the mdac.ham driver, .NLM files are supplied by Novell.
Refer to the Novell documentation for instructions on running Sbackup.
3. Load the following drivers (.NLM) to use a CD-ROM under NetWare
5.0 (the NLM, CD-ROM, is supplied by Novell):
: load mdac.ham
: load scsicd.cdm (in the startup file)
: load cdrom
: cd mount [volume name]
After the CD-ROM is mounted, the volume on the CD-ROM can be
mapped from any workstation and accessed.
Summary of Contents for eXtremeRAID
Page 2: ......
Page 27: ......
Page 29: ...Register fm Page vii Wednesday March 24 1999 1 49 PM...
Page 30: ...Register fm Page viii Wednesday March 24 1999 1 49 PM...
