click!
17
Take one test strip from the
vial and close the cap of
the vial. Insert the test strip
into the test strip port
on the meter. The meter will
automatically activate.
Once the strip is inserted, the meter turns on, a beep signal is
issued (if volume is turned on) and the strip gets initialised
while the progress is visualised on the display
. When the
meter is ready to apply blood onto the strip, the test strip
symbol
will appear on the screen with the blood drop
flashing.
Obtain a blood sample
using the lancing device.
Hold the finger on the
lancing device and click
the release button.
