50
When the battery symbol
appears on the display while
the meter is in use, the
batteries should be replaced
as soon as possible. The
test results may not be saved
if the batteries run out.
Your meter is delivered with 2 CR2032, 3 volt
batteries installed. Two new batteries will
provide power to perform about 1 000 tests
under normal circumstances.
Battery change
To change the batteries
make sure the meter is
turned off. Unlock the bat-
tery cover by pushing the
latch to the right and open
the battery compartment.
Remove the used batteries
one at a time. Slip your
index finger under the bat-
tery to lift and pull out as
shown.
