ASSEMBLY STEPS
1. Attach the Front Stabilizers (2) and the Rear Stabilizer (3) to the Main Body (1),
using 4 sets of
M10x80mm Carriage Bolts (15), Washers (16) and Domed Nuts (17).
2. Take the Front Post (4) and join the Middle Computer Wire (23) with Lower Computer
Wire (24). Release the Tension Knob (21) from the Front Post (4) and connect the
Upper Tension Cable (21) to the Lower Tension Cable (25). (* Please read next note*).
Tighten with 4 sets of M10 X 20mm Bolts (19) and
28 Curve
Washers (18).
Summary of Contents for PL-22100
Page 1: ...MAGNETIC BIKE PL 22100 INSTRUCTION MANUAL...
Page 3: ...EXPLODED DIAGRAM...
Page 10: ......
