Torque Schedules
70
Torque Schedules
The myPV ClearSky™ Interconnection was designed to be mechanically assembled
using the following torque schedules.
Torquing Values
For all bolted connections, unless otherwise specified, refers to the chart below.
For electrical components, see component manufacturer’s data for all screw terminal
tightening torques.
Torque Values
COURSE THREAD
TORQUE
FINE THREAD
TORQUE 1
49.0 in-lb5.5 N-m
1/4 - 20
55.0 in-lb6.2 N-m
101.0 in-lb11.4 N-m
5/16 - 18
112.0 in-lb12.7 N-m
180.0 in-lb20.3 N-m
3/8 - 16
204.0 in-lb23.0 N-m
24.0 Ft-lb32.5 N-m
7/16 - 14
27.0 Ft-lb36.6 N-m
36.5 Ft-lb49.5 N-m
1/2 - 13
41.0 Ft-lb55.6 N-m
53.0 Ft-lb71.9 N-m
9/16 - 12
59.0 Ft-lb80.0 N-m
73.0 Ft-lb99.0 N-m
5/8 - 11
83.0 Ft-lb112.5 N-m
129.0 Ft-lb174.9 N-m
3/4 - 10
144.0 Ft-lb195.2 N-m
Summary of Contents for ClearSky
