EN - 3 -
BEFORE USING THE APPLIANCE
General warnings
WARNING:
Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING:
Do not use mechanical devices or other means
to accelerate the defrosting process, other than those recom-
mended by the manufacturer.
WARNING:
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING:
Do not damage the refrigerant circuit.
WARNING:
In order to avoid any hazards resulting from the in-
stability of the appliance, it must be fixed in accordance with the
following instructions:
WARNING:
When positioning the appliance, ensure the supply
cord is not trapped or damaged.
WARNING:
Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
SYMBOL ISO 7010 W021
Warning:
Risk of fire / flammable materials
•
If your appliance uses R600a as a refrigerant (this information
will be provided on the label of the cooler) you should
take care during transportation and installation to prevent
the cooler elements from being damaged. R600a is an
environmentally friendly and natural gas, but it is explosive.
In the event of a leak due to damage of the cooler elements,
move your fridge away from open flames or heat sources
and ventilate the room where the appliance is located for a
few minutes.
•
While carrying and positioning the fridge, do not damage the
cooler gas circuit.
• Do not store explosive substances such as aerosol cans
PART - 1.
