RO
MY4014 - Manual de utilizare
32
sequence is: liquid ingredient, eggs, salt and milk powder etc. When adding the
ingredient, the flour can’t be wetted by liquid completely. The yeast can only be
placed on the dry flour. And yeast can’t touch with salt. When you use the delay
function for a long time, never add the perishable ingredients such as eggs, fruit
ingredient.
TROUBLE SHOOTHING
Questions & Answers on Bread maker
Problem
Cause
Solution
Smoke comes
out of the baking
compartment or of
the vents
The ingredients
stick to the baking
compartment or on
the outside of the
baking pan
Pull out the plug and clean the
outside of the baking pan or the
baking compartment.
The bread goes down
in the middle and is
moist on the bottom
The bread is left too
long in the pan after
baking and warming.
Take the bread out of the baking
pan before the warming function is
over.
It is difficult to take
the bread out of the
baking pan.
The bottom of the
loaf is stuck to the
kneading blade
Clean the kneading blade and
shafts after the baking. If necessary,
fill the baking pan with warm
water for 30 minutes, and then
the kneading blade can be easily
removed and cleaned.
The ingredients are
not mixed or the
bread is not baked
correctly
Incorrect program
setting
Check the selected menu and the
other settings.
The START/STOP
button was touched
while the machine
was working
Do not use the ingredients and start
over again
The lid opened
several times while
the machine was
working
Never open the lid frequently,
otherwise it is necessary, such as
add ingredients. And make sure
that lid was closed well after being
opened.
Long blackout while
the machine was
working
Do not use the ingredients and start
over again.
The rotation of the
kneading blade is
blocked
Check that the kneading blade is
blocked by grains, etc. Pull out the
baking pan and check whether the
drivers turn. If this is not the case,
send the appliance to the customer
service.
The appliance does
not start. The display
shows HHH
The appliance is still
hot after the previous
baking procedure
Pull out the plug, take out the
baking pan and leave it to cool at
room temperature. then insert the
plug and start again.
Summary of Contents for MY4014
Page 1: ...Manual de utilizare Mașină de pâine MY4014 ...
Page 22: ...User manual Bread maker MY4014 ...
Page 40: ......