EN MY4182 - User manual
31
by turning the Froth Control Knob to the right for more foam and to the
left for less foam.
Note: The foam intensity can be adjusted during the brewing cycle.
Note: Some clean water will flow out of the frothed milk dispensing
tube during heating process, this is normal. When reach the preset
temperature, the unit will start brewing the milk according to your
selection. When done, milk will flow out automatically, when the desired
amount is reached, turn back the function knob to middle position to
stop flowing. Keep waiting for 3 seconds, then turn the function knob
to Espresso position to customize the brewing to your preference. Your
delicious cappuccino is ready to be enjoyed.
Note: If continuously brew Cappuccino or Latte, the filters and the
portafilter shall be rinsed with clean water every time, to avoid
vaporization occurring during brewing.
PREPARING FROTH MILK
The unit also allows you to prepare froth milk only. Turn the function knob
to
position if you wish to add more foam to your beverage or to
prepare froth milk for any other beverage, e.g. macchiato, hot chocolate,
chai latte, etc. When done, turn back the function knob to middle position
to stop it.
