EN MY9081BK - User manual
11
receiving calls.
2.3 Standby screen and Icons
This phone provides a Standby screen. Through the instruction
and various icons on the screen, you can have the operating
information needed.
The Standby screen provides various function short-cuts via a
touch screen. Furthermore, this Standby screen has a Pet function.
It will show different reactions when you have incoming calls and
messages. Have fun with it!
2.4 Key function
Power Key power
: Power on/off the phone
Note:
In this user guide, press means press an actual button on the
phone.
2.5 Text Input Method
This phone provides various text input methods that allow you to
use less key strokes to input and search for text.
2.6 Call Function
After the setup described in the previous sections is completed,
you are ready to make and receive calls using the basic
information provided in this section.
Note
:
When you are using headset, please plug/unplug the headset
gently to avoid damaging the headset jack.
2.6.1 Phone power on/off
Power on
Press and hold
power
to turn on the phone. If PIN code is required,
please refer to the previous section in this guide.
Power off
contacts of SIM card is easily damaged by scratching, so take it
out carefully before assembling it into the phone.
Switch off the phone, remove the back cover, battery and other
external power source. Fit the SIM card into the SIM card slot.
Align the angled corner of the SIM card with the slot. Slide in the
SIM card, make sure it is in place, install the battery, and restore
the back cover.
Likewise, to remove the SIM card, switch off the phone, remove
the battery and then take out the SIM card.
2.2.3 Unlock the SIM card
PIN code
Your Personal Identification Number (PIN) code protects the SIM
card against unauthorized use. Your PIN code is usually supplied
with the SIM card. If this security function is enabled, you need to
enter the PIN code every time you turn on the phone. You can also
disable this function.
To unlock the SIM card, press and hold the power button to turn on
the phone. Enter the PIN code. After three consecutive incorrect
PIN code entries, the code is blocked, and you need the PUK code
to unblock it.
PUK code
This code is required to change a locked PIN code. If the code is
not supplied with the SIM card, contact your service provider. After
ten consecutive incorrect PUK code entries, the SIM card cannot
be used any more. Please contact your service provider to buy a
new SIM card. You cannot edit PUK code. If it is lost, Please
contact your service provider.
2.2.4 Connecting to the network
After the SIM card is unlocked, your phone will automatically
search for the registered network or other local available network.
Once connected, the name of the network carrier will appear on
the top of the screen.
You phone is now in Standby mode, ready for making and
