To switch the player into or out of standby mode:
(Always switch the player into standby mode after use)
Press STANDBY button
on the remote
or
STANDBY button on the front panel
BUTTON FUNCTIONS
Standby ON / OFF
Open / Close disc tray
To open and close the disc tray:
Press OPEN/CLOSE button
on the remote
OPEN/CLOSE button on the front panel
15
OPEN
or
1
Progressive/Interlaced Scan Mode
The player is equipped with two video output modes:
1) Interlaced scan video output (CVBS, S-Video, Y Pb Pr), and
2) Progressive scan video output (Y Pb Pr only)
To switch between the two modes:
Press
button twice in stop mode with the drawer
open.
Note: The first press of the
button will briefly
indicate the current Video Mode, both on the TV and the front
panel display:
Interlaced: “Interlace Out” on TV, “IntEr” on front panel
Progressive scan: “Progressive” on TV, “PS” on front panel
The second press (within approx. 3 seconds) then changes
the Video Mode.
PROG SCAN
PROG SCAN
Incorrect setting of the Video Scan
Mode may lead to black screen with
no signal output.
If you observe this symptom, please
press the PROG SCAN button to
change the Video Mode.
IMPORTANT NOTE
STANDBY
Summary of Contents for Z122
Page 1: ...Progressive Scan DVD Video Player Owner s manual Z122 ...
Page 12: ...NOTES ...
Page 13: ...NOTES ...