SETUP MENU
(Press SETUP button)
Spkr Setup
Pro Logic
The player is equipped with a Dolby Pro Logic decoder.
You may turn this on or off.
Cent Delay / Surr Delay
For 5.1 decoded output (see
below),
you may add signal delay to the Center and
Surround speaker outputs, to compensate if the
Center or Surround speakers are closer to the
listener than the Left and Right front speakers.
The delay can be set between 0ms and 5ms which
will compensate for differences in speaker distance
for 0 to 5 feet (0 to 1.52m)
Spkr Setup
Language Video
Audio 1 Audio 2 Rating
Subwooder
Surround
Center
C S Spkr Size
Return
Off
Off
Off
Large
The player defaults to L R down mixed stereo
audio output. This is the normal setting for
connecting the player to a TV.
Highlight “Spkr Setup” icon, press
button,
sub menu appears. Highlight “5.1 Channel” icon,
press
button. Highlight the connected
speaker’s name press
button to switch
the speaker ON or OFF. Highlight “C S Spkr Size”
and press
button to select Large or Small
speakers. If “Large” is selected the speakers will
receive the full frequency range. If “Small” is
selected the bass frequencies will be redirected
to the subwoofer. After setting all speakers, press
button to quit.
ENTER
ENTER
ENTER
ENTER
SETUP
Test Mode
With no disc in the player and the tray closed the
Test Mode option will appear in the Audio 2 menu.
Highlight “Test Mode” and press
. The
player will output a noise signal to each of the
speakers in turn to allow you to test each speaker
(analogue outputs only). The TV display will show
which speaker is active. Press
to leave
Test Mode.
ENTER
RETURN
Highlight "Rating", then press
button
repeatedly to change the setting:
ENTER
Rating
Enter this menu to alter the rating level of the player.
The player will require a password to play any disc with
a rating level higher than the setting.
Press
button
SETUP
Highlight "Rating" icon
press
ENTER
Rating sub menu appears.
Language Video
Audio 1 Audio 2 Rating
Password
Rating
----
8. Adult
1.
2.
3.
4.
5.
6.
7.
8.
Kid Safe
G
PG
PG_13
PG_R
R
NC_17
Adult
Highlight "Password", re-enter the password and
press
button to lock. Press
button to save the setting and quit.
To reset the password, first input the current
password (e.g. “7890”) and press
.
The TV screen will display “unlock”. Then input
the desired new password and press
again.
ENTER
SETUP
ENTER
ENTER
Default setting
Password
Rating
: 7890
: 8.Adult
Highlight "Password", input the 4 digit password,
and press
button to release the rating lock.
ENTER
24
Enter this menu to alter the analogue audio
output settings.
Press
button
SETUP
Highlight "Audio 2" icon
press
ENTER
Language Video
Audio 1 Audio 2 Rating
Pro Logic
Cent Delay
Surr Delay
Spkr S etup
Audio 2 sub menu appears.
Highlight the desired item and press
to
change the setting.
Press
button to save the setting and quit.
ENTER
SETUP
Audio 2 (analogue audio)
Test Mode
Off
0 ms
0 ms
Down Mix
Default setting
Pro Logic
Cent Delay
Surr Delay
Spkr Setup
: Off
: 0 ms
: 0 ms
: Down Mix (5.1 not activated)
Summary of Contents for Z122
Page 1: ...Progressive Scan DVD Video Player Owner s manual Z122 ...
Page 12: ...NOTES ...
Page 13: ...NOTES ...
