22
23
9. Route all cables away from the motor box. Pry the
headrail gently away from the barrels, and route
any nearby cables behind the barrels. Use the
cable clips
(G)
to hold extra length from the cables
and to protect the cables from the tilt rod and
other moving parts within the headrail (Fig. 2.13).
CAUTION
PINCHED CORDS:
Ensure that the motor box does
not pinch any cords from your blinds. Pinched
blinds cords may prevent you from raising and
lowering your blinds. Position the cords so that
they aren’t pinched beneath the motor box brack-
et’s legs (Fig. 2.12a). Move the cords to either the
outside edge of the motor box bracket or the mid-
dle indented plane of the motor box (Fig. 2.12b).
Fig. 2.12a
Fig. 2.12b
10. Ensure that the barrels are aligned with each
other, and reinsert the tilt rod until the right end of
the rod is between the motor box and the barrel to
the right of the motor box.
11. Select the rod adapter
(F)
that fits over your tilt
rod, and slide the adapter
over the end of the rod
(Fig. 2.14). Ensure that
the rod adapter’s snaps
are oriented toward the
motor.
Fig. 2.13
Fig. 2.14
