thenaturearoma.com
TROUBLESHOOTING & MAINTENANCE
TROUBLES
ELIMINATION
METHODS
MAINTENANCE
NO LCD indication
Check the power supply
and the switch
Connect the power supply
again and turn it ON
NO atomization
Check the power supply;
check the pump working or
not; check the working
status (working time or
pause time)
Connect the power supply
again to check the pump
and set the program again
Small atomization amount
Check the atomizer if block
or not; check the pump
good or no
Clean the atomizer and
change the pump
Comes out liquid oil from
external atomization
connector
Check if the atomization
connector is loose or not
Check if the machine is
lean or not
Tighten the atomization
connector and make the
machine upright
Oil Leaking
Check if the oil bottle is
loose or not: Check if the
bottle seal is lost or not
Tighten the oil bottle and
bottle seal
OPERATION FOR ADDING AND CHANGING THE OIL
For the first time to the machine, please tighten the oil bottle before connecting
power supply, Set the working time and adjust the aroma concentration.
If need to add or change the oil, please cut down the power supply. Then open
the machine with the key rotate the empty oil anticlockwise to take out the bottle
to put the oil in again and finally clockwise rotate the bottle and make sure it is
tight. Then connect the power supply again.