04 Learn to use WalkingPad
09
10
1. Mode instruction
2. Instructions of the standby
mode control
3. Instructions of manual mode control (primary mode)
Standby Mode
Light of the Standby mode is on;
Motor and sensor stop responding.
Manual Mode
Light of the manual mode is on;
Control the speed through the remote
control or APP.
Automatic Mode
Light of the automatic mode is on;
Speed is automatically controlled by
intelligent algorithm.
It follows the speed of walking.
Standby Mode
The motor and sensor stop responding
in this mode to prevent nonusers from
accidentally triggering the WalkingPad.
Mode Switch
Short press: return to the previous mode.
Manual Mode
In this mode, the speed of the W alkingPad can be controlled by the remote
control. It is recommended that beginners use the manual mode first and then
use the automatic mode after being skilled in using the WalkingPad. The
manual mode is controlled by remote control by default, that is, the
START/STOP button of the remote control is used to start or stop the Walk-
ingPad, which can be modified in the client "Personalized".
ACCELERATION
Short press: increase speed by 0.25 mi.
START/STOP
Short press: Start or Stop the WalkingPad.
DECELERATION
Short press: reduce speed by 0.25 mi.
MODE SWITCH
Short press: switch to automatic mode.
Long press: switch to Standby mode.
In the manual mode, set as
the intelligent start and stop,
the WalkingPad will start
automatically to the target
speed (default is 1.75 mi/hr )
while entering this area.
