Mytee 7000 Flood Hog, Instructions For Use Manual

1. Work away from outlet and power cord to prevent cord damage.  

2. Monitor and check pump-out regularly to avoid overfilling of tank.  

3. Do not allow filter to become obstructed. Damage to pump-out may occur.  

After Use 

1. Unplug. 

2. Inspect hoses and replace if damaged. 

3. Inspect filter. Clean or replace if damaged.  

4. Store the machine in a clean, dry place. 

5. Open recovery tank cover to promote air circulation.  

Maintenance Schedule 

Maintenance item

Daily

Once a week

Clean and inspect Tanks 

Clean and inspect Hoses 

Inspect filters 

Check power supply cable 

Clean machine with all purpose cleaner and cloth 

Remove and clean float shut-off screen from tank  

Inspect vacuum hoses for holes and loose cuffs

x 

x 

x 

x 

x 

x 

x

Trouble Shooting 

There is no power.

1. Plug machine in proper outlet.

2. Check circuit breaker; reset circuit breaker, other items should not run on the 

same circuit as machine. Outlet must be a 20-amp circuit.  

Pump does not work properly. 

1. Check pump wire. May need to reconnect wire.  

2. Switch plate switch may need to be replaced. 

3. If pump motor brushes are worn, replace pump. 

4. Float switch obstructed. Clean.  

Vacuum motor does not work properly.

1. Check that hose is tightly connected. 

2. Close drain hose valve completely. 

3. Secure the vacuum tank tightly. 

4. If water is coming out of vacuum motor, use a low foaming detergent.

FAQs 

Q: How much does the 7000 weigh and what are the shipping dimensions?

A: 93 Pounds - Box dimensions are 20” x 30” x 48”. Must ship motor freight.

Q: What comes standard with the 7000?

A: The 7000 comes with two vacuum hoses (H294), a wand (H908), a vacuum head 

(P570) and squeegee vacuum head (G200).

Q: Where do I plug the machine in?

A: The 7000 requires a 20A grounded circuit. Please note: GFI outlets may trip

before the breaker setting.

Q: Is there anything I can do to increase the expected life of my machine?

A: Running the vacuum motors with the tank empty and lid off will allow excess 

moisture in the vacs to dry off.  

Warranty

MYTEE LIFETIME LIMITED WARRANTY POLICY

Mytee Products, Inc. endeavors to provide high quality products and product support 

to its customers and therefore backs up all of its new products purchased from Mytee 

Products Inc. (“Mytee”) or any authorized Mytee distributor/service center with this 

lifetime limited warranty. This limited warranty begins on the date of the customer’s 

purchase and is valid and available to the original purchaser with proof of purchase, 

and is not transferable. Mytee’s products are for commercial use only and are not 

intended for personal, family or household uses.
HOUSING LIMITED LIFETIME WARRANTY: Mytee warrants for life that its rotation-

ally-molded housings will be free from manufacturing defects. This warranty covers 

the cost of replacement or repair only and does not cover shipping or labor costs.
WEAR PARTS 90-DAY LIMITED WARRANTY: Mytee will replace all wear parts for 

90 days from the date of original purchase. “Wear parts” are items which wear out 

as a result of usage or the passage of time and are consumed despite attempts to 

maintain them, such as gaskets, wheels, brass, cords, wires, electrical terminals, 

hoses, switches, thermostats, plastisol parts, filters, bearings, brushes, solenoids, o-

rings, bulbs, heating elements, castors, or other parts deemed wear items in Mytee’s 

sole discretion. This warranty covers the cost of replacement only and does not cover 

shipping or labor costs.
PUMP, VACUUM MOTOR AND HEATER TWO-YEAR LIMITED WARRANTY: Mytee 

warrants that pumps, vacuum and floor machine motors, and heaters will be free 

from manufacturing defects, defects in workmanship, and defects in material for two 

(2) years from the date of original purchase. This warranty does not apply and is void 

if the pump, vacuum motor, or heater has worn brush motors, water damage, chemi-

cal build-up, chemical damage, or evidence of abuse, neglect or tampering. This 

warranty covers the cost of replacement or repair only and does not cover shipping 

or labor costs.
HOWEVER, OTHER THAN SET FORTH HEREIN, MYTEE GIVES NO WARRANTY, 

EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, 

FITNESS FOR ANY PARTICULAR PURPOSE, PRODUCTIVENESS, INFRINGE-

MENT, OR OTHER MATTER, OF ANY GOODS WHICH MYTEE SHALL SUPPLY.  

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION 

ON THE FACE HEREOF. MYTEE SHALL IN NO WAY BE RESPONSIBLE FOR THE 

PROPER USE AND APPLICATION OF THE GOODS. MYTEE NEITHER ASSUMES 

NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MYTEE ANY OTHER 

LIABILITY IN CONNECTION WITH THE SALE OF MYTEE’S GOODS. THIS LIM-

ITED WARRANTY POLICY MAY BE CHANGED OR WITHDRAWN BY MYTEE AT 

ANY TIME WITHOUT NOTICE.
LIMITATION OF DAMAGES: THE REMEDY OF REPLACEMENT OR REPAIR 

OF ANY DEFECTIVE GOODS SHALL BE THE EXCLUSIVE REMEDY UNDER 

ANY WARRANTY MADE BY MYTEE, WHETHER EXPRESS OR IMPLIED. IN NO 

EVENT SHALL MYTEE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, PROPERTY DAMAGES, OR PERSONAL INJURIES.
All limited warranties are void for, and Mytee does not warrant in any way, any prod-

uct that evidences misapplication, improper installation, abuse, lack of maintenance, 

negligence in use or care, abnormal use, alteration of design,

modification, use of 

incompatible or corrosive chemicals, use in a rental service, and/or servicing, installa-

tion of parts, or repairs by anyone other than Mytee or a Mytee authorized distributor 

or service center. Mytee may make changes in products it manufactures and markets 

at any time; these changes are made without obligation to change, retrofit, or up-

grade any product previously sold or manufactured.
Mytee has no obligation to honor the limited warranties set forth herein unless the 

original purchaser, promptly upon discovering the warranty claim and prior to continu-

ing to use the product, contacts Mytee or a Mytee authorized distributor or service 

center to describe the claim and to receive and follow instructions for documenting 

and resolving the claim. In addition, the purchaser must provide the product to which 

the claim applies to Mytee or a Mytee authorized distributor or service center for a 

thorough inspection. In addition, the purchaser must provide/return the product intact, 

unmodified, with all of its original parts. 
If any provision or portion of this limited warranty policy is found to be unenforceable, 

then the remaining provisions and portions shall remain valid and enforceable. 

If any provision or portion of this limited warranty policy is found to be limited by law, 

then that provision or portion shall be construed to make it effective within the 

bounds of law.  For example, if there are legal limitations on the duration of warran-

ties, the warranties made herein shall be construed to have the minimum duration 

required by law, or, if there are legal limitations of exclusion of remedies, the exclu-

sions made herein shall be construed to apply to the fullest extent possible without 

violating the law.
The validity, construction and performance of this warranty policy shall be governed 

by the laws of the State of California, without respect to conflicts of laws principles.  

The exclusive jurisdiction of any legal action arising from or related to this warranty 

policy shall be in the State of California and no legal action shall be commenced 

elsewhere.

Return Material Authorization Procedure

It is the responsibility of any Authorized Service Center (ASC) or Distributor with 

written authorization to ensure the Customers equipment is repaired as soon as 

possible. Only Mytee Products Inc. or it’s authorized dealers with written authoriza-

tion, service centers, and agents may make warranty repairs on these products. All 

others do so at their own risk and expense. 
The Distributor must follow Mytee Products, Inc. standard RMA procedure:
1. When a repair falls within the Warranty time period for a piece of equipment, the 

Distributor will fill out a RMA/Warranty claim form. This form will act as a repair order  

to replace any defective parts.  
2. All defective parts must be returned to Mytee Products, Inc. with the RMA/claim 

form for evaluation at the customer’s expense. This shipping is non-refundable. All 

warranty claims are subject to an evaluation by Mytee Products, Inc. to determine if 

warranty will be approved. Any credit for repair and/or parts will only be issued upon 

evaluation and approval from Mytee Products, Inc.  
3. When Warranty is approved, the Distributor’s account will be credited for the 

replacement part(s). Mytee Products, Inc. will ship the warranted replacement part(s) 

to the Distributor prepaid. If Warranty is denied the Distributor’s account will not be 

credited for any parts sent for this claim.