background image

5

Important Safety Information

To reduce the risk of fire, electrical shock, or injury:

1. Read all instructions before using equipment. 

2. Use only as described in this manual. Use only manu-

facturer’s recommended attachments. 

3. Always unplug power cord from electrical outlet before 

attempting any adjustments or repairs. 

4. Do not unplug by pulling on cord. To unplug, grasp the 

plug, not the cord. 

5. Do not pull or carry by cord. Do not close a door on 

cord or pull cord around sharp edges or corners. 

6. Do not run appliance over cord. Keep cord away from 

heated surfaces.  

7. Do not use with damaged cord or plug. If cord is dam-

aged, repair immediately. 

8. Do not use outdoors or on wet surfaces and or stand-

ing water. 

9. Always unplug or disconnect the appliance from power 

supply when not in use. 

10. Do not allow to be used as a toy. Close attention is 

necessary when used by or near children. 

11. Do not use in areas where flammable or combustible 

material may be present. 

12. Do not leave the unit exposed to harsh weather ele-

ments. Temperatures below freezing may damage com-

ponents and void warranty. 

13. Use only the appropriate handles to move and lift 

unit. Do not use any other parts of this machine for this 

purpose. 

14. Do not pull on hoses in order to move the unit. Only 

use the appropriate handles. 

15. Keep hair, loose clothing, fingers, and all parts of the 

body away from all openings and moving parts. 

16. Use extra care when using on stairs. 

17. To reduce the risk of fire or electric shock, do not use 

this machine with a solid-state speed control device. 

18. The voltage and frequency indicated on the name 

plate must correspond to the wall receptacle supply 

voltage. 

19. When cleaning and servicing the machine, local or 

national regulations may apply to the safe disposal of 

liquids which may contain: chemicals, grease, oil, acid, 

alkalines, or other dangerous liquids. 

20. Do not leave operating unattended.

Summary of Contents for S-300 TEMPO

















Reviews: