19
As shown in the picture, the main function descriptions appear close to the 4
buttons.
•
The
mode
key toggles the maximum operating state power.
•
The advanced functions may be selected by pressing the Menu key
•
The Temp/Fire #2 key is disabled.
•
The display reverts back to the START screen by pressing the On/Off
key.
If the controller is in auto mode and Thermostat is a set ON, the requested
temperature will be replaced by the string “Term:”, followed by the device
status (“C” = Closed(contact), “O” = Open(contact)), because when the
controlled heater is in auto mode its operation is not controlled by the
room temperature, but by the external room thermostat.
If the controlled heater has no blowing fan, the string on the display won't
appear, and the corresponding key will be disabled.
Figure 7.3
The
mode button
allows you to cyclically change the operation of the
stove, from manual (
MANU
) to automatic (
AUTO
), unless
ECO
mode is
selected from the
Menu
(see
Settings
).
In case of the Thermostat(external) is
ON ; the mode button allows to set the Maximum level power that the
boiler will reaches.
M o d e E c o M e n u
T e m p : C
