44
5.0 Burner’s start up
Figure 39
You can turn on the equipment in various ways which are listed below.
5.1 Manual burner’s start up using the screen.
You can switch on the burner by pressing the ON / OFF (key 5) for 2 seconds
at least, until IGNITION appears in the display (Figure 39).
A confirmation sound sounds and on the screen appears the status of the
stove, which changes according to the actual state (the stove is switched on).
5.2 Start up using the thermostat
The automatic start up of the appliance can be carried out by the use of the
built-in thermostat. The boiler must be ready (
Menu 5.1
) in the power supply
with the power switch ON and at the same time in the
AUTO
mode provided
that the room temperature is lower than the preset temperature.
The automatic ignition of the stove can also be done via the
ECO
program
with the above requirements, plus the temperature difference we have set in
the
ECO
program,
Menu 5.3.5.3
2 2 .0 °C
1 1 1 4
I G N I T I
O N
