50
7.0 Burner Maintenance & Cleaning
For optimum performance and proper function it is necessary to perform
often some simple cleaning procedures. The following steps must be taken
before any maintenance action:
• Make sure the burner is turned off and at a low temperature and it is going
to remain off till the cleaning is complete.
• Make sure that ashes at the chamber are completely inactive.
• Appropriate tools for maintenance should always be used.
• After the maintenance has finished and before the burner is restarted,
check out that all the parts and the protective parts as well are re-
positioned in their original positions.
• Use only original or authorized spare parts.
In case of using/placing spare parts and components beyond the
company's specifications, the warranty expires.
Any modification or replacement of a part of the stove must be
done according to the manufacturer's instructions and approval.
The company assumes no responsibility for any interventions and
modifications to the stove without its written approval.
Only authorized and specially trained technicians should carry out the
complete periodic cleaning
if necessary
. This also depends on the
quality of
the pellet
,
the operating time
and the efficiency of the chimney
. Instructions
are given below:
