1.ASSEMBLY OF THE GOAL
Notice: Lubricate the connection assemblies on the narrow ends a bit before starting the assembly. That facilitates the assembly
and extends the durability of the product! Assemble the goals as indicated in fig. 1.
2. ASSEMBLY OF THE GOAL NET
The little flags sewed in the net indicate the upper goal corners. Fasten the goal net on the goal frame by threading the cord as
indicated in fig.2 around the tubes and knotting the loose ends.
3. STAND LOCKING OF THE GOAL
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the ground is suitable for the application of pegs
(e.g. no water pipes for sprinkler devices!). Make sure that the pegs are completely driven into the ground and have firm position.
Avoid protruding fastenings (risk of stumbling).
The ground anchors are suitable for grass and soft soil, do not install them on concrete, asphalt or any other hard surfaces.
Drill the pegs as vertically as possible about 2-3 cm deep into the ground.
Please note that the pegs lose stability if they are drilled too obliquely into the ground.
Never play with an unsecured goal or never leave the goal unsecured respectively.
Instructions on assembly and use
EN
Please read these instructions carefully. The instructions are an integral component of the product.
Therefore, please store them and the packaging carefully in case questions arise in the future.
Please always include these instructions when handing on the product to a third party.
This product must be assembled by an adult. This product is notdesigned for industrial use.
The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use
for the purpose it has been designed for.
Item weight: 4.9 kg
Dimensions when assembled: 76 cm x 213 cm x 152 cm
TECHNICAL SPECIFICATIONS
152.4
213.3
76.2
7
1
2
3
4
5
1
1
8
9
7
8
9
1
4
6
2
3
11
10
10
Abb.1
Abb.2