7
/
9
Imagine that, you are facing to the 3735DUO, and the yellow filament
load into the left motor and pink filament load into the right motor.
If you set the parameters as below,
Color A
as 0 and
Color B
as 100.and
it will come out as the picture, the color will mixing between the 0% to
100% of the height of the model,
If you set the
Color A
as 20% and the
color B
as 80%,the model will
come out like this, below the 20% of the height of the model, it will be
yellow, and above the 80% ,it will be pink, and between the 20% to
80%,it will be the mixing color of yellow and pink.
2, Dual color model
1, change the printing model to dual color model as below,
