mywigo MWG359 Mini, User Manual

27

Wi -Fi

Wi-Fi on/off: Select this check box if you prefer to use Wi-Fi for 

your data connection. 

Wi-Fi settings: Open the Wi-Fi settings screen; select it from the 

network list. Provide your username or password if required. 

Bluetooth

Bluetooth on/off: Use this check box to turn Bluetooth services 

on or off. 

Bluetooth settings: With Bluetooth services on, you can open 

the Bluetooth settings screen to:

• Rename your device.

•  Select  to  be  discoverable  for  up  to  120  seconds,  or  not 

discoverable. 

• Pair or unpair with one of the Bluetooth devices in range - You 

will be asked to type a PIN before pairing. Refer to the 

manufacturer’s documentation for the PIN code. 

• Rescan for devices.

More…

Airplane mode on/off: When airplane mode is selected, all

 wireless connectivity is off. This icon           will display in the 

status bar when airplane mode is selected. 

Mobile network 

• Select data roaming capability. 

•  Select  a  wireless  operator  network  -  Scan  for  all  available 

networks, or select a network automatically. 

•  Add  or  edit  network  Access  Point  Names  (APNs)  -  Do  not 

change this setting unless advised to do so by your wireless 

operator!

3.2 Device

Audio profiles

Select one user profile and enter the following options:

Vibrate: Select to have your phone vibrate for incoming calls. 

Volumes: Select to open the volume control, and then slide your 

finger along the volume bar to set an incoming call ring volume 

or alarm, playing back music, videos. 

Voice/video ring tone: Select to decide on a ring tone to use for 

incoming calls. Note that you can override this setting for 

individual contacts in the Edit contact details screens. 

Notification ring tone: Select a ring tone to use for a notification 

(e.g., new message). Note that you can override this setting for 

new Calendar event notifications, text and multimedia message 

notifications. Go to the applications settings screens to select 

specific ring tones. 

Dial pad touch tones: Select to have a tone sound when you use 

the on-screen Dialer. 

Touch sound: Select to have a sound play when you select an 

item on the screen either using touch.

Display

Brightness: Select to open the brightness control, and then slide 

your finger along the brightness bar to set the level. In sunlight, 

increase the level. 

Sleep: Select to decide how long your phone must be inactive 

before the screen turns off. 

Storage

View and manage the data storage on your phone.

Memory card: Monitor and manage the use of your Memory 

card from this screen: 1. View how much space you are using on 

your memory card. 2. Select to use your memory card as USB 

mass storage when your phone is connected to your computer 

(selected by default) 3. Unmount/eject your memory card from 

your phone. Note that when your phone is connected to your 

computer via USB, you cannot view pictures or play any media 

stored on the card from your phone. 

Internal phone storage: Reports how much internal storage is 

free. 

Applications

View all the applications stored on your phone and how much 

space they occupy. If you’ve downloaded an application from 

Android Market, you can uninstall it from this screen. Select a 

specific application to: 

1. Clear your user data (if you have any associated with a 

particular application). 

2. Disassociate the application with any actions. 

3. Uninstall - If you’ve downloaded an application from Android 

Market, you will be able to uninstall it from this screen by 

selecting Uninstall. 

3.3 Personal

Location access

Select a source for determining your location. 

Security

Screen unlock pattern: Create a pattern you will be asked to 

draw before your screen will unlock. You can select to make the 

pattern visible or invisible as you draw it. 

SIM card lock settings: Lock your SIM card for extra security. You 

can also change your SIM card PIN from this screen. If you don’t 

know your SIM PIN, you can obtain it from your wireless 

operator. 

Visible passwords: Select to have your password display as you 

type it. 

Unknown sources: Select this check box if you want the ability 

to download applications from the Web. With this check box not 

selected, you will only be able to download applications from 

Android Market. To ensure your personal data and phone 

remain secure; it is recommended you not select this check box. 

Backup & reset

You can select to reset your phone to factory settings. This will 

erase all your data from the phone and require you to sign in 

and go through the set¬up screens to use any of the 
applications.

3.4 Accounts

Add accounts

Turn on/off synchronization for all services. 

3.5 System

Date & time

Set time, time zone, and date: Use Automatic unless you need to 

override the network values. 

Time format: Select from 12 or 24 hour formats. 

Date format: Select from a variety of formats. 

Developer options

If you are an application developer, you may be interested in 

these settings: 

USB debugging: If you want be able to communicate with your 

phone directly via USB, select ‘USB debugging’ check box. 

Stay awake: To prevent your phone from sleeping while 

charging (via power adapter or USB), select ‘Stay awake’ check 

box. 

About phone

View your phone Status: This screen lists a variety of informa-

tion, including your phone number, the network you are 

currently using, the type of network, signal strength, whether 

you are roaming or not, any WLAN addresses you’re connected 

to, and more. 

View the model number and version information for your 

phone.

4 ActiveSync

4.1 Data synchronization

Some applications on your phone (Contacts and so on) give you 

access to the same personal information that you can add, view, 

and edit on your computer using Web applications. This means 

that when you add, change, or delete your information in any of 

these applications on the Web, the updated information also 

appears on your phone, and vice versa. Also, if you lose your 

phone or if your phone is destroyed, your personal information 

is not lost and will appear, as before, on a replacement phone. 

This mirroring of information happens through over-the-air 

data synchronization, or data “syncing”. Data syncing occurs in 

the background and shouldn’t ever get in your way. You’ll know 

your data is being synchronized when you see this icon in the 

status bar: 

Because sending large amounts of data back and forth over the 

air can take time and require considerable bandwidth, there are 

some settings on the phone that allow you to control data sync. 

Sync by application

To control synchronization Contacts, you can do the following: 

1. On the Home screen, then touch               and select Settings. 

2. Select Accounts. When any of the applications are synchroniz-

ing, you will see the “sync” icon               . You will also see the last 

time your data was synchronized. 

3. By default, the personal information in Contacts will sync 

whenever you make a change or receive a new message. You 

can change this behavior: 

Auto-sync: When selected, Auto-sync will sync Contacts 

automatically, as you make changes or receive new messages. 

When OFF, information will not be synced automatically, 

although you can force sync by using the individual application 

check boxes described below. 

4. Sync problems: 

If you see this icon                to the left of the sync check box, then 

there was a temporary problem with the data synchronization. 

Check your data connection and try again later.

4.2 Bluetooth

You can use Bluetooth to send and receive calls using a headset 

or hands-free car kit. 

Turn on Bluetooth services

1. On the Home screen, then touch                and select Settings. 

2. Select Bluetooth, and then select ‘Bluetooth’ check box to 

turn on Bluetooth services. 

3. When on, the Bluetooth icon appears in the status bar.

Discoverability

By default, your phone is not “discoverable”. This means other 

Bluetooth devices will not see your phone in their scans for 

Bluetooth devices. If you make your phone discoverable, it will 

be visible to other Bluetooth devices for up to 120 seconds. 

To make your phone discoverable: 

1. Make sure you have turned Bluetooth on.

2. Touch the Bluetooth name to make your phone visible to 

other Bluetooth devices for 120 seconds. 

Name your Bluetooth device

1. Make sure you have turned Bluetooth on.

2. Select Settings > Bluetooth > Bluetooth settings > Device 

name. 

3. Type the name for your device in the dialog box, and then 

select ‘OK’. 

4. Your new device name appears on the Bluetooth settings 

screen.

Pair & connect with Bluetooth devices 

Before your phone can communicate with a Bluetooth headset 

or hands-free car kit, the devices must “pair”, then “connect”: 

1. Make sure you have turned Bluetooth on.

2. Touch “SEARCH TOR DEVICES” and your phone starts scanning 

for Bluetooth devices within range. As they are found, the 

devices appear in the list of Bluetooth devices. 

3. To pair with a device in the list, select it. 

4. Type the device’s PIN and then select ‘OK’. 

5. Once paired, select the device name to connect. You can also 

touch & hold the name to open the context menu, and then 

select Connect. 

6. Pairing and connection status appear under the device name. 

7. Once the other Bluetooth device shows “connected” status, 

you can start using it to make and receive phone calls. 

8. To disconnect or unpair with a device, touch & hold the device 

to open the context menu. Select Disconnect or Unpair, as 

appropriate. If you select ‘Unpair’ when connected, you will be 

disconnected as well. 

Notes: The phone supports only the headset and hands-free 

Bluetooth profiles, so if you try to connect to a device that is not 

a headset or hands-free car kit, then you will receive an “unable 

to connect” message. 

If you pair with a second headset while connected to the first, 

the first headset will remain connected. To switch connection to 

the second headset you must manually select that headset 
again after pairing.

Rescan for Bluetooth devices

If you want to update the list of Bluetooth devices, select ‘Scan 

for devices’.