MYXfitness MYX II, Product Manual

12

MOUNT AND DISMOUNT

To mount the product safely:

1.  Verify the product is fully stopped and pedals are 

completely stopped.

2.  Grasp handlebar and step carefully onto pedals.

To dismount the product safely:

1.  Wait until the pedals and flywheel come to a 

complete stop. Stop the pedals using ANY of the 

following methods:
•  Slow your pedaling until the pedals come to a 

complete stop.

•  Increase the resistance by turning the push 

brake system knob clockwise (+) until the pedals 

come to a complete stop.

•  Push down and hold the resistance knob until the 

pedals come to a complete stop.

2.  Once the pedals and flywheel are stopped, remove 

feet from pedal clips or cages, as applicable.

3.  Grasp handlebars firmly for support and carefully 

step down.

Emergency Dismount:

If an emergency stop and dismount is required:
1.  Stop pedaling. The fastest way to stop is to push 

down and hold the resistance knob until the pedals 

come to a complete stop.

2.  Once the pedals and flywheel are stopped, remove 

feet from pedal clips or cages, as applicable.

3.  Grasp handlebars firmly for support and carefully 

step down.

ADJ USTING RESISTANCE

The resistance knob is located at the base of the 

handlebar post (see diagram on page 6). Note that it 

takes several full turns to feel changes in resistance.
1.  Rotate right to increase resistance.
2.  Rotate left to decrease resistance.
3.  Press down on the knob to stop the flywheel.

 To avoid injury or death, the following 

procedures must be followed to safely mount and 

dismount the product. Do not mount or dismount 

the product (or remove your feet from the pedals) 

until both the pedals and flywheel have come to a 

complete stop. Mounting or dismounting while pedals 

are moving can seriously injure user.

1

2

3