WHC040
Rev. 01-2021
English
24
Up Alarm
It is possible to enable the function and
establish the height at which the anchor-
winch stops; after which it is only possible to
give pulsed commands.
Settable values: OFF, 0.5
– 1.0 – 1.5 – 2.0 –
2.5 -
… 10.0 (metres or feet).
Select with
Select value with
Confirm with
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and
.
Settable value: OFF, 1,2,3
…25 (metres or
feet).
Select with
Select value with
Confirm with
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Select with
= Yes
= No
Confirm with
Exit
To return to the previous menu.
Confirm with
Settings menu
SETTINGS
LITE 5
OFF TIME 30
LANGUAGE ITA
EXIT
CONTRAST 3
Use the
(
DOWN
) or
(
UP
) key to move around the parameters.
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Select with
Select value with
Confirm with
Lite
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
Select with
Select value with
Confirm with
Summary of Contents for WHC040
Page 73: ......
Page 74: ......
Page 75: ...Note Notes Notes Bemerkungen Notas...
Page 76: ...MZ ELECTRONIC S R L www mzelectronic it e mail info mzelectronic it...
