WHC040
Rev. 01-2021
English
28
Use
Press the
(
ON
) key to activate controls and to switch on the display lighting. The
display
lighting
switches off 15 seconds after the last command given (adjustable
default
time
– see “BkLight Time”).
Press key
(
UP)
to control the anchor ascending.
Press key
(
DOWN)
to cast anchor.
When any key is released (
UP or DOWN)
the corresponding action is stopped.
Measurement reset
To reset the measurement count simultaneously press the
(
ON
) and the
(
UP
) keys for at least
three seconds.
Measurement reset may also be performed in the
Measurement
menu by selecting
“
Yes
” in the
Reset
Measure
row.
Automatic casting of the anchor
This function must be enabled in the
Alarms and Functions
menu
(disabled by default).
Select t
he row “
Auto Down
” and set the value at which the anchor must stop. Then press the
(
ON
)
and
(
DOWN
) keys for at least three seconds. Once anchor casting has commenced, release the keys.
For safety reasons it is however possible to interrupt automatic descent by pressing any
instrument key.
When any of the thruster buttons are pressed, the thruster screen is displayed; an arrow next to the
thruster and the moving propeller icon indicates which thruster is being driven and in which direction.
Summary of Contents for WHC040
Page 73: ......
Page 74: ......
Page 75: ...Note Notes Notes Bemerkungen Notas...
Page 76: ...MZ ELECTRONIC S R L www mzelectronic it e mail info mzelectronic it...
