NATIVE-C1
T
ECHNICAL
R
EFERENCE
M
ANUAL
V1.0
Q
UICK
S
TART
- 10 -
3.
Q
UICK
S
TART
To ensure proper functioning of the
NATIVE-C1
during its usual lifetime, take the following
precautions before handling the board.
3.1.
Unpacking
Electrostatic discharge, incorrect board installation, and uninstallation can damage circuits or
shorten their lifetime. Before touching integrated circuits, ensure to take all required
precautions for handling electrostatic devices.
Avoid touching gold contacts of the Connectors to ensure proper contact when inserting
modules into the
NATIVE-C1
.
Make sure that the chassis and its attachments are undamaged and complete according to
delivery note.
3.2.
Mechanical Requirements
For operation, the
NATIVE-C1
requires cooling units (included) and a power module (separate
order item).
Before installing or uninstalling modules in the
NATIVE-C1
, read the Installation Guide and
the User’s Manual of the
modules.
Check all installed boards and modules for steps that you have to take before turning on or
off the power. After taking those steps, turn on or off the power if necessary.
Make sure, parts to be installed / removed are hot-swap-capable, if you do not switch off the
power.
Ensure that all modules are connected to the
NATIVE-C1
with the connector completely
inserted.
3.3.
Voltage Requirements
3.3.1.
Power supply
The power consumption of the
NATIVE-C1
depends on the number and variants of installed
Power Modules and AMCs.
