NATIVE-C1
T
ECHNICAL
R
EFERENCE
M
ANUAL
V1.0
I
NTRODUCTION
- 9 -
Table 1
–
Technical Data
Form Factor
•
1U 19-inch EIA rack mount
Slots
•
6x AMC (max. power: 80W/slot)
•
MCH (max. power: 80W/slot)
•
Power Module
•
1x 2HP JTAG Switch Module
•
2x Cooling Units (hot-swappable)
Backplane
•
Ports 0/1: 1GbE routed to each AMC
•
Port 2/3: Point-to-point SATA/SAS to next mid-size slot number
•
Ports 4-7 and 8-11: Fat Pipe connectivity via MCH Fabric,
supporting PCIe, XAUI, SRIO, or 40GBASE-KR4
•
TCLKA, TCLKB, and FCLKA
•
JTAG Connector
•
FRU ROM
•
IPMI
•
Replaceable backplane
Cooling Unit
•
4 fans per CU with each fan rated at 20 CFM
•
Individual-controlled fan speed
•
Straight through side-to-side cooling
•
Fully managed, redundant, and hot-swappable
•
Monitored fan power for early failure detection
•
Air filter removed detection
Optional Components
•
Power Module:
NAT-PM-DC840
or
NAT-PM-AC600
or any MTCA
compliant power module
•
Carrier Hub:
NAT-MCH
or any MTCA compliant carrier hub
Compliance
•
Standard operating temperature: -5°C to +45°C
•
Storage temperature: -45°C to 70°C
•
Telcordia GR-63-CORE
•
Telcordia GR-1089-CORE
•
NEBS Level 3, per SR-3580
•
ETS300 019-1-1, Part 1-1 (Class 1.2E equipment)
•
ETS300 019-1-2, Part 1-2 (Class 2.3 equipment)
•
ETS300 019-1-3, Part 1-3 (Class 3.2 equipment)
•
PICMG AMC.0 R2.0
•
PICMG AMC.2 R1.0
•
PICMG AMC.1 R2.0
•
PICMG MTCA.0 R1.0
Order Codes
NATIVE-C1
•
1U 19" rack-mountable MTCA platform, 2 Cooling Units - 6 single mid-size
AMC payload slots (PM is separate order item)
NATIVE-Filler-B
•
Filler Panel for
NATIVE-C1
or
NATIVE-C2
, closing the gap between the
chassis bottom and a full-size AMC, PM, or MCH
