11
Fig. 6
Fig. 7
Fig. 8
Hook up the microphone to the connector on the wiring
system (Fig. 6).
Position the microphone so that it adheres to the piece
of Velcro (Fig. 8).
CAUTION
: After installing the microphone, make sure
the white dot and the writing “N-com” on the
microphone face the mouth (Fig. 12). When using the
microphone, keep it near your mouth.
Arrange the cables inside the helmet, in the bottom
part.
Put the comfort padding back in place, making sure
that the connection jack cable sticks out (Fig. 8).
