11
3.
INSTALLATION
The Bluetooth Kit MULTI can be installed on the helmet in two different
ways, depending on the type of helmet used: using pliers with screw closing
or by gluing the support to the helmet.
3.1.
Fixing with screw pliers
Fig. 1
Fig. 2
Fig. 3
Thoroughly clean the outer surface of
the helmet, left side.
Apply the adhesive rubber to the back
of the wired support (fig 1).
Insert the pliers between the helmet
padding and the outer shell (fig 2).
Insert and tighten the screw, securing
the system to the helmet (fig. 3). Make
sure the rubber is properly positioned
on the shell.
Make
sure
the
microphone
is
positioned exactly near the mouth.
Summary of Contents for bluetooth kit multi
Page 1: ...EN SAFETY AND INSTRUCTIONS FOR USE ...
Page 37: ...37 ...
Page 38: ...38 ...
Page 40: ...Printed on recycled paper Bluetooth Kit MULTI 01 06 2016 16 40 00 ...