24
In both cases, the machine moves on the work piece without any pedestal required.
However, you must hold the machine at the end of the bevel to prevent it from falling to
the ground.
Attention:
When executing the above-described operations, wear work shoes and protective
goggles.
MAINTENANCE AND ADJUSTMENT
6.1
Recommendations
Important:
Maintenance personnel must be qualified technicians.
Never work on moving parts of the machine, not even with tools or other objects.
It is strictly forbidden to remove safety devices, modify them, or handle the safety equipment
of the machine. The manufacturer will reject any responsibility for machine safety in case of
such activities.
Always use original spare parts (see chapter 8 “Spare parts”).
Attention:
Always wear work gloves when maintaining the machine. Perform maintenance
operations with the machine at standstill, disconnected from the power supply.
Before every work shift, and as necessary during work, clean the tool, cylinders and support
ruler with compressed air.
Attention:
When using compressed air for cleaning, wear protective goggles and never use pressure
over 2 bar.
Use the delivered 24-mm spanner for setting screws when adjusting the machine.
