7
2.2
Safety labels
Safety labels are placed on the bevelling machine to protect the operators.
Meaning of the labels:
This label is placed on the electrical panel of the bevelling machine, and indicates the
presence of high voltage.
Do not remove the label from the machine.
2.3
Qualification and protection of operators
The employer is obliged to inform the operators about safety standards; moreover, he must
ensure their observance and make sure that the working area is large enough and well lit.
The term “operator” means any person who carries out installation, operation, adjustment,
maintenance, cleaning or repairs of the machine.
Attention:
Before starting work on the machine, the operator must be acquainted with its
properties and have read this entire manual.
Attention:
The operator must always:
1.
Check that all safety guards are in place and safety devices are functioning before
starting the machine.
2.
Avoid wearing clothes or jewellery which may get caught in moving parts.
3.
Wear approved protective clothing, such as non-slip shoes, ear protectors and
protective goggles.
4.
Apply safety standards; see that they are observed at all times; and, if in doubt, consult
this manual again before taking any measures.
5.
Contact the machine supplier if unable to remove defects causing its malfunction, if
there are defective parts or the running is abnormal.
