12/1/2006
15
o
recv-mail
(Configure incoming mail options)
leave-on-server
(enable or disable to leave messages on the server)
mailbox-name
(set the mailbox’s name)
mailbox-password
(set the mailbox’s password)
server-name
(set the server’s name)
server-port
(set the server’s port number)
o
send-mail
(Configure outgoing mail options)
smtp-server-name
(set the smtp server name)
smtp-server-port
(set the smtp server port number)
host-name
(set the host name)
from-address
(set the mail ID for the from address, ex. info@n-tron.com)
from-address-identity
(string associated with the mail ID, ex. N-Tron)
to-address
(set the to mail address field)
cc-address
(set the cc mail address field)
reply-to-address
(set the mail ID reply to address)
subject
(set the subject field of the message)
o
serial
(Configure the serial settings for the serial port s0)
auto-dialin
(enable or disable auto-dialin)
escape-monitor
(enable or disable escape monitor)
escape-string
(set the escape string, default ‘+++inet’)
s0
(configuration options for serial port s0)
•
auto-dialin
(configure auto dialin settings)
o
enable/disable
(enable or disable auto-dialin)
o
message
(enable or disable auto-dialin message)
o
trig-mode
(char, dtr, dtr-char, or none trig mode options)
•
auto-dialin-ipaddress
(set an IP address for the auto-dialin feature)
•
auto-dialin-port
(set the port number for the auto-dialin feature)
•
auto-dialin-protocol
(telnet)
•
auto-dialout
(enable or disable auto dialout)
•
auto-dialout-port
(set the port number for the auto-dialout feature)
•
auto-dialout-protocol
(telnet)
•
baud-rate
(Possible baud-rate value(s) are 300 600 1200 1800 2400 4800 9600 19200 38400 57600
115200 230400)
•
buffer-datasize
(Buffer data-size range: [1-1500] bytes)
•
buffer-time
(set a buffer time in seconds, 0 for no buffer)
•
chat-script
(Chat-script is used to establish physical link from the dialing to answering end in case of
modem connect, when modem dialing-method is set to chat-script.)
•
connect-state
(answering or dialing state)
•
connect-type
(direct or modem connect type)
•
data-bits
(set the number of data-bits over the serial line, default is 8 bits)
•
dialout-monitor
(set the dialout monitor to dtr or none)
•
echo-command
(enable or disable the echo command)
•
flow-control
(rts-cts or none)
•
host-interaction-mode
(enable or disable host interaction mode)
•
login-string
(string up to 8 characters)
•
modem
(modem configuration)
o
connect-string
(set the connect string for a modem)
o
dial-number
(set the number to dial)
o
dial-prefix
(any prefix dialing needed can be set here)
o
dial-suffix
(any suffix dialing needed can be set here)
o
dialing-method
(use configuration of chat-script)
o
hangup-string
(set string used to hang up the line)
o
init-string
(set init number [1-5])
o
ok-string
(set an ok string)
o
ring-string
(set a ring string)
•
parity
(none, odd, or even parity)
•
raw-dialin
(enable or disable raw-dialin)
•
raw-dialout
(enable or disable raw-dialout)
•
stop-bits
(set the number of stop bits [1, 1.5, or 2])
o
time
(Set system time HH:MM:SS)
o
watchdog
(Enable or disable watchdog)
(continued…)
