(Revised 2011-07-21)
page 150 of 152
KEY SPECIFICATION
Switch Properties
Number of MAC Addresses:
4,096
Aging Time:
Programmable
Latency Type:
2.9 µ
s
Switching Method:
Store & Forward
Physical
Height:
2.50” / 6.35 cm
Width:
7.40” / 18.76 cm
Depth:
4.15” / 10.54 cm
Weight (max):
2.10 LBS / 0.95 kg
Din-Rail mount:
35mm
Electrical
Redundant Input Voltage:
10-30 VDC
Input Current (max):
3.0 A
Inrush @ 24VDC:
12.6A/0.05ms
Input Ripple:
Less than 100 mV
N-TRON Power Supply:
NTPS-24-3 (3 Amp@24VDC
)
(NOTE: Not appropriate for use with M12, POE, and HV models.)
Environmental
Operating Temperature:
-
2
0°C to 70°C
Storage Temperature:
-40°C to 85°C
Operating Humidity:
10% to 95%
(Non Condensing)
Operating Altitude:
0 to 10,000 ft.
Shock and Vibration
(bulkhead mounting)
Shock:
200g @ 10ms
Vibration/Seismic:
50g, 5-200Hz,Triaxial
Reliability
MTBF:
>1Million Hours
Connectors
10/100BaseTX:
Ten (10) RJ-45 Copper Ports
100BaseFX:
Two (2) SC or ST Duplex Ports
1000BaseSX/LX: Up to two (2) SFP LC Duplex Ports as an option
1000BaseT: Up to two (2) SFP RJ45 Duplex Ports as an option
Recommended Wiring Clearance:
Front:
4" (10.16 cm) FX models
2“ (5.08 cm) TX models
Side:
1" (2.54 cm)
Network Media
10BaseT:
>Cat3 Cable
100BaseTX
:
>Cat5 Cable
1000BaseT
:
>Cat5e Cable
minimum length : 1 meter
maximum length : 100 meters
100BaseFX, 1000BaseSX:
Multimode:
50-62.5/125µm
100BaseFXE, 1000BaseLX:
Singlemode:
7-10/125µm
