2 of 8
GT1505 Bump Out Convenience Window Installation Manual
www.NabcoEntrances.com
P/N C-00208
Rev 12-15-17
CHAPTER 1: WARNING LABELS
Warning labels are universal and used to alert an individual of potential harm to one’s self or to others. The following warning labels
are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer to this
page in the event that a warning label is displayed within this manual and further definition needs to be explained.
Indicates potentially dangerous situations . Danger is used when there is a hazardous situation
where there is a
high
probability of severe injury or death . It should not be considered for
property damage unless personal injury risk is present .
Indicates a hazardous situation which has
some
probability of severe injury . It should not be
considered for property damage unless personal injury risk is present .
Indicates a hazardous situation which
may result in a minor injury
. Caution should not be used
when there is a possibility of serious injury . Caution should not be considered for property damage
accidents unless a personal injury risk is present .
Attention: A situation where material could be damaged or the function impaired .
Notice: Indicates a statement of company policy as the message relates to the personal safety or protection of
property . Notice should not be used when there is a hazardous situation or personal risk .
Note: Indicates important information that provides further instruction.
CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS
Do not install, operate or service this product unless you have read and understand the General
Safety Recommendations, Warning Labels, contained in this manual . Failure to do so may result in
bodily injury, or property damage .
Read, study and understand the installation and operating instructions contained in, or referenced
in this manual before operating . If you do not understand the instruction, ask a qualified
technician . Failure to do so may result in bodily injury, or property damage and will nullify all
warranties .
Disconnect all power to the junction box prior to making any electrical connections . Failure to
do so may result in serious personal or fatal injury . When uncertain whether power supply is
disconnected, always verify using a voltmeter .
Do not place finger or uninsulated tools inside the electrical controller . Touching wires or other
parts inside the enclosure may cause electrical shock, serious injury or death .
If the window appears broken or does not seem to work correctly, it should be immediately
removed from service until repairs can be carried out or a qualified service technician is contacted
for corrective action .
Handle Glass With Care!!! Use caution when moving and installing the glass panels . These panels
are designed to be assembled with tempered glass . Any sharp objects that come in contact with
glass may cause the glass to shatter . NABCO Entrances is not responsible for glass that is broken
during the installation of this Unit .
Notice: This manual, the owner’s manual and all other associated manuals must be given to and retained by
the purchasing facility or end user .
Notice: Wiring must meet all local, state, federal or other governing agency codes .
Notice: All electrical troubleshooting or service must be performed by qualified electrical technicians and must
comply with all applicable governing agency codes .
DANGER
WARNING
CAUTION
WARNING
WARNING
WARNING
WARNING
DANGER
DANGER
CAUTION
CAUTION
