NABO 32 LV4365, Instruction Manual

English

   - 34 -

Instant Recording

Press 

Record

 button to start recording an event 

instantly while watching a programme. You can press 

Record

 button on the remote control again to record 

the next event after selecting the next programme 

from within the EPG. Press 

Stop

 button to cancel 

instant recording. 
You can not switch broadcasts or view the 

Media 

Browser

 during the recording mode. While recording a 

programme or during the timeshifting, a warning message 

appears on the screen if your USB device speed is not 

sufficient.

Watching Recorded Programmes 

Select the 

Recordings 

from the 

Media Browse

r 

menu. Select a recorded item from the list (if previously 

recorded). Press the 

OK

 button to view the  

Play 

Options

. Select an option then press 

OK

 button.

Press the 

Stop

 button to stop a playback and return 

to the 

Recordings

.

Slow Forward

If you press 

Pause

 button while watching recorded 

programmes, the slow forward feature will be available. 

You can use 

Rapid advance

 button to slow forward. 

Pressing 

Rapid advance

 button consecutively will 

change slow forwarding speed.

Note:

 Viewing main menu and menu items will not be available 

during the playback. Please also note that previously set 

recording timer/s will not function while using the 

Recordings 

menu.

Recording Configuration

Select the 

Recording Settings

 item in the 

Media 

Browser>Settings

 menu to configure the recording 

settings. 

Format Disk:

 You can use the 

Format Disk

 feature 

for formatting the connected USB disk. Your PIN is 

required to use the 

Format Disk

 feature.

Note:

 Default PIN can be set to 

0000

 or 

1234

. If you have 

defined  the  PIN(is  requested  depending  on  the  country 

selection) during the 

First Time Installation

 use the PIN that 

you have defined.

IMPORTANT:

 Formatting your USB drive will erase 

ALL the data on it and it’s file system will be converted  

to FAT32. In most cases operation errors will be fixed 

after a format but you will lose ALL your data.
If “

USB disk writing speed too slow to record

” 

message is displayed on the screen while starting a 

recording, try restarting the recording. If you still get 

the same error, it is possible that your USB disk does 

not meet the speed requirements. Try connecting 

another USB disk.

Media Browser Menu

You can play photo, music, and movie files stored on a 

USB disk by connecting it to your TV. Connect a USB 

disk to one of the USB inputs located on the side of 

the TV. Pressing the 

Menu

 button while in the 

Media 

Browser

 mode will access the 

Picture

, 

Sound

 and 

Settings

 menu options. Pressing the 

Menu

 button 

again will exit from this screen.

You can set your 

Media

Browser

 preferences by using the 

Settings

 Menu.

Loop/Shuffle Mode Operation

Start playback with the 

Play 

button and activate 

All files in the list will be 

continuously played in original 

order

Start playback with the 

OK 

button and activate 

The same file will be played 

continuously (repeat)

Start playback with the 

Play

button and activate 

All files in the list will be 

played once in random order

Start playback with the 

Play

button and activate 

, 

All files in the list will be 

continuously played in the 

same random order.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled 

devices, that are connected through HDMI ports by 

using the remote control of the TV.
The 

CEC

 option in the 

System>Settings>More

 menu 

should be set as 

Enabled

 at first. Press the 

Source

button and select the HDMI input of the connected 

CEC device from the 

Sources List

 menu. When 

new CEC source device is connected, it will be listed 

in source menu with its own name instead of the 

connected HDMI ports name(such as DVD Player, 

Recorder 1 etc.).
The TV remote is automatically able to perform the 

main functions after the connected HDMI source has 

been selected.
To terminate this operation and control the TV via 

the remote again, press 

Quick Menu

 button on the 

remote, highlight the 

CEC RC Passthrough

 and 

set as 

Off

 by pressing Left or Right button. This 

feature can also be enabled or disabled under the 

System>Settings>More

 menu.

The TV supports also ARC(Audio Return Channel) 

feature. This feature is an audio link meant to replace 

other cables between the TV and the audio system 

(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio 

outputs automatically. So you need to decrease TV 

volume to zero manually, if you want to hear audio from 

connected audio device only (same as other optical or 

co-axial digital audio outputs). If you want to change 

connected device’s volume level, you should select