English
- 38 -
Mobile TV Instructions
Switching the TV On Using 12 Volt
1.
Connect the cigarette lighter plug cable into the cigarette lighter socket of your car.
2.
Plug the other side of 12 volt cable into DC 12 socket on the back side of the TV. Then the standby LED
will light up.
3.
Press the
Standby
button,
Pro/-
buttons or a numeric button on the remote control or press the
control button on the TV. The TV will then switch on.
4.
Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching the TV Off
1.
Press the
Standby
button on the remote control or press the control button on the TV, the function options
menu will be displayed. The focus will be on the
Standby
option. Press and hold the button for about 2
seconds to activate this option. The icon colour of the option will change. Then press the button once again,
the TV will switch into standby mode.
2.
Unplug cable connectors and power plugs.
ATTENTION: 12 V Input
AC Adaptor Specifications
Manufacturer Name
SHENZHEN HUNTKEY ELECTRIC CO., LTD
Model Identifier
HKA09012070-7U
Input Voltage (V)
100-240
Input AC Frequency (Hz)
50-60
Output Voltage (V)
12,0
Output Current (A)
7,0
Output Power (W)
84,0
Average Active Efficiency
% 89,0
Efficiency at Low Load (%10)
% 90,2
No-load Power Consumption (W)
0,15
DVB functionality information
This DVB receiver is only suitable for use in the country which it was designed to be used in.
Although this DVB receiver conforms to the latest DVB specifications at the time of manufacture, we cannot
guarantee compatibility with future DVB transmissions due to changes that may be implemented in broadcast
signals and technologies.
Some digital television functions may not be available in all countries.
We continually strive to improve our products; therefore, specifications may change without prior notice.
For advice on where to purchase accessories, please contact the store where you purchased your equipment.
V+
V+
V-
V-
