EN
70
BEFORE CALLING YOUR AFTER SALES SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in
improper levels or when a problem occurs in the appliance. Warning
codes are displayed in the Freezer and Cooler Indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
SR
"Failure
Warning"
There is/are some
part(s) Out of order
or there is a failure in
cooling process
Call Service for
assistance as soon as
possible.
SR – Set
value blink
on freezer
set value
screen
Freezer comp.
Not Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods
that are thaw and use in
short time period.
2. Set the freezer
temperature to colder
values or set the
super freeze , until the
compartment gets to
normal temperature.
3. Do not put fresh food
until this failure is off.
SR – Set value
Blink on cooler
set value
screen
"Refrigerator
comp. Not Cold
enough"
Ideal temperature for
Ref. Compartment is
+4
o
C. If you see this
warning your foods
have risk of spoiling.
1. Set the refrigerator
temperature to colder
values or set the super
cooling mode until the
compartment gets to
normal temperature.
2. Do not open the door
much until this failure is
off.
SR – Set value
blink on freezer
and cooler set
value screen
"not cold enough
Warning"
It is combination of
"not cool enough"
error for both of the
compartments.
You will see this failure
when first starting the
appliance. It will be off
after the compartments
gets normal temperature
SR – Set value
blink on cooler
set value
screen
Refrigerator
comp. too Cold
The foods starts to
freeze because of
the too much cold
temperature
1. Check if the “Super
cooling mode” is on
2. Decrease the
refrigerator temperature
values
