- 4 - VS 4042
PARTS DESCRIPTION
1.
Front fan guard
2.
Fan blade
3.
Base
4.
Speed bu
tt
ons
ASSEMBLING INSTRUCTION
1.
Unscrew the grill retaining ring from the motor sha
ft
.
2.
Put the rear fan guard on the motor sha
ft
and screw together with the grille retaining ring.
3.
Put the fan blade on the motor sha
ft
.
4.
Put on the front fan guard and then close the clips and using the appropriate screw to secure the grille
together.
CLEANING
1.
Before servicing the fan and
afte
r each occasion of use, switch o
ff
the appliance and unplug the mains
cable from the socket.
2.
Never immerse the appliance in water (danger of short-circuit).
To clean the appliance, only wipe it
down with a damp cloth and then dry it carefully. Always take out the mains plug
first
.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Supply voltage: 220-240V~ 50Hz
Power consumption: 40W
OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Oscilla
ti
on: to make the fan head oscillate, push down the oscilla
ti
on knob. To stop the fan head from
oscill
ati
ng, pull-up the oscil
lati
on knob.
speed, 3 = high speed.
3.
The fan is switched on using the push bu
tt
ons on the base, i.e. 0:
Off,
1 = Low speed, 2 = medium
CAUTION:
Press only one of the speed control bu
tt
on at a
ti
me. Permanent damage to the switch housing may
result if two or more of the bu
tt
ons are pressed simultaneously.
1
2
4
3
