Nabrico DF-1 Series Owner'S Manual Download

Page: 38 / 72

NABRICO DF-1 ND ELECTRIC WINCH Owner’s Manual

OM-DF1-017-G

C.3 GEARMOTOR TECHNICAL INFORMATION (SHAFT MOUNTED)

DRIVESYSTEMS

GENERAL INSTRUCTIONS

RETAIN FOR FUTURE USE

1. Importance of the operating instructions

These operating instructions are intended to provide general

information and safety guidelines. It is the responsibility of

the buyer, machine builder, installer and user of the NORD

product to make sure that all the proper safetynotes and op-

erating instructions have been reviewed and understood. If

the contents of this instruction or any applicable operating

instructions are not understood, please consult NORD.

WARNING

Electric motors, gearmotors, electrical brakes, variable

frequency drives, and gear reducers contain potentially

dangerous high-voltage, rotating-components and

surfaces that may become hot during operation. All work

involved in the transport, connection, commissioning and

maintenance of any NORD product must be carried out by

qualiﬁ ed and responsible technicians.

2. Inspect incoming freight

Before accepting shipment from the freight company,

thoroughly inspect the NORD equipment for any shipping

and handling damage. If any goods called for in the bill of

lading or express receipt are damaged, or if the quantity is

short, do not accept until the freight express agent makes an

appropriate notation on your freight bill or express receipt. If

any concealed loss or damage is discovered later, notify your

freight carrier or express agent at once, and request a formal

review of your claim.

Claims for loss or damage in shipment must not be deducted

from the NORD invoice, nor should payment of the NORD

invoice be withheld awaiting adjustment of such claims, as

the carrier guarantees safe delivery. NORD will try to assist in

collecting claims for loss or damage during shipment; how-

ever, this willingness on our part does not remove the trans-

portation company’s responsibility in reimbursing you for col-

lection of claims or replacement of material.

3. Obtaining detailed operating instructions

One can receive the detailed installation and maintenance

instructions by entering a serial number (or NORD order

number) at the appropriate location on the NORD web site.

i. Record the serial number from your gearmotor, gear

reducer, or motor nameplate, or record the serial number

found on your order conﬁ rmation.

ii. Go to

www.nord.com/docs

to download the appropriate

operating instructions.

EXAMPLE:

www.nord.com/docs

4. Intended use

NORD is a supplier of electric motors, gearmotors, reduc-

ers, electromechanical brakes, mechanical variators, and

electrical variable frequency drives that are intended for

commercial installations on larger systems and machines.

WARNING

NORD does not accept any liability for damage or injury

caused by:
• Inappropriate use, operation or adaptation of

the drive system.
• Unauthorized removal of housing covers, safety

  and inspection covers, guarding, etc.
•  Unauthorized modiﬁ cations to the drive system.
•  Improper servicing or repair work on the drive system.
•  Damage caused during shipment or transportation.
•  Disregard of the important Safety Notes or

Operating Instructions.

U10000 - 1 of 2

www.nord.com/docs

08.08.12

NORD Gear Corporation

Toll Free in the United States: 888.314.6673

NORD Gear Limited

Toll Free in Canada: 800.668.4378