Nacon GC-400ES, Instruction Booklet

GC-400ES

FR

8

07. CREATING A PROFILE

In this section we will explain how to create a profile for an FPS type game by following these steps: 
• Select the position of the profile: firstly choose the profile number. 
Click in the left-hand bar on the required position. In this example you want to have access to this 

profile when activating the PRO-GAMER mode, therefore choose «Profile 1». 
• Create and name your profile: just click on the «New» button on the main «PROFILE MANAGEMENT» 

screen and enter the desired name. 
We recommend that you choose short and clear names. In this example you want to create a generic 

FPS PRO profile. 

Therefore name it FPS_PRO_JEU1. 
NOTE 1:  Adding an abbreviation of the name of the game for which it is designed is strongly advised. 

This is even more important when you are using a different keyboard mapping. 

NOTE 2:  You have the option of creating a new profile by loading an existing profile and renaming it. 

The loaded profile will serve as a basis and the new one will be saved under the new name. 

This will not change your base profile, but the new one that has been created. 

• Modifying the sensitivity: as the FPS type profile has been chosen the significant responsiveness will 

be an advantage for aiming.
Therefore you modify the X and Y sensitivity on the same screen. 

You apply a sensitivity 

X = 4 

Y = 3. 

This difference will allow you to be quicker for horizontal movements than for vertical movements. You 

can adjust them at your convenience. This choice can also account for the resolution difference of 

your screen in relation to the X and Y axis or the format of your screen. 
Click on the «Save» button now to go to the advanced configuration. 
• Advanced configuration: click on the image with the right analogue stick to go into the advanced 

configuration of your right analogue stick.
As you have just entered a more or less heightened sensitivity, it may be difficult to properly target an 

adversary. It will therefore be very responsive but the aim will be approximate. To compensate for this, 

modify the «RESPONSE CURVE OF THE ANALOGUE STICK». 
Increase the analogue stick stroke for small movements in order to have a more accurate aim. 
Therefore set the following values: 

- SMALL MOVEMENTS: 70

- MEDIUM MOVEMENTS: 15

- BIG MOVEMENTS: 15

Now click on the «Save» button.
To avoid inadvertent movements around the neutral area of the right analogue stick (as you have set a 

greater sensitivity than usual), you are now going to adjust the static dead-zone. 

- STATIC DEAD-ZONE / RADIUS: 10

You are now going to tackle aiming with the «DYNAMIC DEAD-ZONE». This zone will allow you to stop 

the cursor after more or less quick movements. This will allow you to stop your crosshair as close as 

possible to your enemy.