PREAMPLIFIERS SECTION
THD(2V in 2V out,CCIF IMD,DIM 100) < 0.004 %
Signal/Noise IHF re 500mV output A wtd.
> 102 dB
S/N re 2V output, max volume > 110 dB
S/N re 100mV o/p (unity gain)
> 92 dB
Channel separation 1KHz
> 80 dB
10KHz > 70 dB
Input impedance
1320pF
Max input, 0.1% thd
> 8 V rms
Output impedance
pre out
75 ohms
Output impedance variable out
< 325 ohms
Output impedance tape out
source Z + 1k ohms
Input sensitivity for 500mV out
158 mV
Frequency response 20-20k tone defeat on
< +/- 0.1dB
tone defeat off
< +/- 0.5 dB
Max output ( 0.03% thd) IHF load
> 10 V
Max output 600 ohm,s load
> 10V
Tone controls Bass at 100Hz +/- 8 dB
Treble at 10KHz +/- 5dB
POWER AMPLIFIERS SECTION
Continuous average power , stereo,8 and 4 ohms at rated thd ,20-20k > 150W
Continuous average power 8 ohms , bridge mode
> 330W
Rated thd, 20-20k, SMPTE and CCIF IMD, DIM 100
< 0.009%
Clipping power ( 1% thd at 1kHz)
>170W
IHF dynamic power 8 ohms >250W
IHF dynamic power 4 ohms >410W
IHF dynamic power 2 ohms >600W
IHF dynamic power 8 ohms(Bridge Mode) >800W
IHF dynamic power 4 ohms(Bridge Mode) >1200W
Peak output current 1msec, 1 ohm
> 50A
S/N A wtd re 1 W
>102 dB
S/N A Wtd re 150W
>123 dB
Damping factor ( re 8 ohms, 50 Hz and 1kHz)
> 200
Frequency response 20-20k
< +/- 0.1 dB
Frequency response - 3dB
3Hz – 70 kHz
Input
impedance
200pF
Input sensitivity for rated power
1.2 V
Voltage
gain
29dB
Headphone output impedance
270 ohms
Channel separation. 1kHz
> 85 dB
10kHz
> 75 dB
Trigger out
Output resistance
< 120 ohms
Output current
50mA
Output
voltage
+12V
OVERALL CD In Speaker Out
THD 20-20k, CCIF IMD, DIM 100 , 0.25W to rated power < 0.009%
S/N A wtd re 1 W
> 94dB
S/N A wtd re 150W ( volume set for 2V input)
> 113 dB
Frequency response 20-20k Tone defeat in
< +/- 0.2 dB
Frequency response -3dB
10 - 65kHz
Channel separation 1KHz > 80 dB
10KHz > 70 dB
Rated power ( 230 or 120 V AC 50.60 Hz)
290 W
Standby power
<1W
Idle power
<120W
Net weight
15.3 kg
Shipping weight
18 kg
Dimensions
435x133x352 mm
- 4 -
SPECIFICATIONS
