9. Press the PAUSE button (6) to temporarily stop
play.
- The PLAY indicator goes OFF and the PAUSE
indicator lights, (the sound is muted!), restart by
pressing PLAY or PAUSE button.
10. Press the NEXT DISC button (9) to select the
next disc.
MUSIC SKIP
11. Press and release the “>>I button (7) to
advance to the beginning of the next track. Press and
hold down the “>>I” button (7) to advance to subse-
quent tracks.
12. Press and release the “I<<” button (7) to return
to the beginning of the currently playing track.
Press and hold down the “I<<” button (7) to return
to previous tracks.
MANUAL SEARCH
13. Press and hold down either << or >> SCAN
button (8) to quickly search the disc in the forward or
reverse direction.
- This unit features 2-speed search. The search
speed will increase after the button is held down for
approximately three seconds.
- The volume is lowered to about 1/4 of the normal
volume.
- Search is possible during PAUSE mode, but no
sound is heard.
- The CD changer will not search beyond the begin-
ning or the end of the disc.
14. Press the STOP button (5) to end normal play.
- The PLAY indicator goes OFF.
- The TRACK Number display shows “1”.
NOTE: The unit will stop when the last track on
disc number 5 has finished playing.
REPEAT DISC PLAY (10)
Press the REPEAT button to select the desired
type of repeat disc play, which can be selected from
the following options:
1. All of the tracks on the loaded discs.
2. One track
3. All programmed tracks
(a) various tracks on several discs
(b) all of the tracks on one disc
(c) one track
REPEAT PLAY: All Of The Tracks On The
Loaded Discs
1. Press the STOP button (5), then press the
CLEAR button on the remote control.
- The MEMORY indicator must be OFF.
2. Press the REPEAT button (10) once.
- The ALL REPEAT indicator lights.
3. Press the PLAY button.
- The PLAY indicator lights.
4. All of the loaded discs are played repeatedly until
the STOP button (5) is pressed.
5. Press the REPEAT button (10) twice more to
end repeat play. Normal play continues from that
point.
6. When the last track on disc number 5 has fin-
ished playing (during normal play), the CD changer
will stop.
-The PLAY indicator goes OFF.
REPEAT PLAY: One Track
1. Press the STOP button, then press the CLEAR
button.
- The Memory indicator must be OFF.
2.Press the REPEAT (10) button twice.
- The REPEAT ONE indicator lights.
3.Press a DISC NO. button on the remote control to
select a disc number.
4.Press the “>>|” or |<<” button to select a track
number.
5.Press the PLAY button.
- The PLAY indicator lights.
6.The selected track is played repeatedly until the
STOP button is pressed.
7.Press the REPEAT button (10) once more to end
repeat play. Normal play continues from that point.
8.When the last track on disc number 5 has fin-
ished playing (during normal play), the CD changer
will stop.
- The PLAY indicator goes OFF.
REPEAT PLAY; All Programmed Tracks
NOTE: PLEASE SEE REMOTE CONTROL SEC-
TION FOR PROGRAMMING INSTRUCTIONS.
1. Press the STOP button, then press the CLEAR
button on the remote control.
-The MEMORY indicator must be OFF.
2. Enter one of the following types of programs
(see “PROGRAMMED DISC PLAY”).
a)Various tracks on several discs
b)One track (1 disc number and 1 track number)
- The MEMORY indicator lights
3. Press the REPEAT button (10) once.
- The ALL REPEAT indicator lights.
4. Press the PLAY button.
- The PLAY indicator lights.
5. All of the programmed tracks are played repeat-
edly in order until the STOP button is pressed.
6. Press the REPEAT button twice more to end
repeat play. Programmed play continues from that
point.
7. When the last track has finished playing during
programmed play, the CD changer will stop.
- The PLAY indicator goes OFF.
- The MEMORY indicator remains ON.
REPEAT PLAY: One Track
1. Press the STOP button, then press the CLEAR
button on the remote control.
NAD
6
GB
