5
Quick
install Guide
Start up
To do initial setup of NAD Amp1 and connect to a network, follow the points 1-7 below.
Notice: the NAD Amp1 has built in Wi-Fi but NAD Amp1 also has LAN connection.
We recommend using the LAN connection, if possible, for optimal signal and signal stability.
Install the Google Home
app on your mobile device
(if not already installed)
.
Connect a pair of speakers to the
amplifier's corresponding right/left
speaker terminals.
Plug in the AMP1 and it will power up
Wa
i
t 30-60 second
s until the 1st
bl
ue
LED
light is flashing
The
AMP1
is now in hotspot mode and
ready for Wi-Fi setup
O
pen
th
e Google Home app ,
tap
"Devices"
in
th
e
top
r
ig
ht
corner of the screen
een nieuw apparaat is
gevonden
Select
the
NAD-Chromecast-build-in Amplifier
listed and tap
SETUP > Continue
and Follow
the guide to finish setup.
De Chromecast cast
button
Th
e AMP1 is
now ready for use. go to a music
streaming app or a song stored on your mobile
device and look for the cast icon to start streaming
music to the AMP1
and
Chromecast build-in
are trademarks of G
oogle inc.
When connecting the AMP1 via a LAN cable to your Home network, you just need to open the Google Home app
after connecting the LAN and power up the amp. start with point 6 from above.
