condition
poSSible cauSeS
poSSible SolutionS
No power.
The power cord is disconnected.
•
Plug the power cord into the wall outlet
securely.
•
No sound.
Power AC lead unplugged or power not switched ON.
•
Check AC lead.
•
Mute ON.
•
Switch OFF Mute.
•
No sound one channel.
Balance control not centered.
•
Center Balance control.
•
Speaker not properly connected or damaged.
•
Check connections and speakers.
•
Input lead disconnected or damaged.
•
Check leads and connections.
•
Weak bass/diffused stereo image.
Speakers wired out of phase.
•
Check connections to all speakers in the
system.
•
No sound from Subwoofer.
Subwoofer is off, not powered or improperly
connected.
•
Power-up subwoofer, check Sub’s AC outlet
or check connections.
•
Noisy reception, hiss.
Weak signal.
•
Check station tuning. Adjust or replace
antenna.
•
Display shows “no service list”.
DAB antenna not connected properly.
•
Check the connection and position of the
DAB antenna.
•
No DAB coverage in the area.
•
Call your local DAB broadcast providers for
coverage information.
•
Reception with whistling, buzzing
noise.
Interference from other computers, games consoles.
•
Check station tuning. Switch off or move the
source of electrical noise.
•
No RDS information.
Station signal too weak.
•
Check station tuning. Adjust or replace
antenna.
•
Station not transmitting RDS data.
•
Tune to an RDS station that supports station-
name (PS mode) and radio-text (RT mode).
•
C 7BEE does not respond to
remote control.
Batteries are flat or incorrectly inserted.
•
Check batteries.
•
IR transmitter window on remote or IR receiver
window on C 725BEE is obstructed.
•
Check IR windows and ensure clear line-of-
sight from remote to C 725BEE.
•
C 725BEE front panel is in very bright sunlight or
ambient light.
•
Reduce sunlight/room lighting.
•
NOTES
• Reset C 725BEE to its factory default settings using front panel buttons only (120V version only): Press and hold [SPEAKER A] button and then [TONE
DEFEAT]. “AH Reset…complete.” is shown in the VFD.
• Reset C 725BEE to its factory default settings using front panel buttons only (230V version only): Press and hold [SPEAKER B] button and then [TONE
DEFEAT]. “C Reset…complete.” is shown in the VFD.
• All stored presets and settings will be deleted upon restoring your C 725BEE to its factory default settings.
REFERENCE
troubleShooting
0
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
