background image

important information for uk cuStomerS

DO NOT

 cut off the mains plug from this equipment. If the plug fitted is not 

suitable for the power points in your home or the cable is too short to reach 
a power point, then obtain an appropriate safety approved extension lead 
or consult your dealer. If, nonetheless, the mains plug is cut off, REMOVE 
THE FUSE and dispose of the PLUG immediately, to avoid possible shock 
hazard by inadvertent connection to the mains supply. If this product is 
not provided with a mains plug, or one has to be fitted, then follow the 
instructions given below:

important

DO NOT

 make any connection to the larger terminal which is marked with 

the letter ‘E’ or by the safety earth symbol or colored GREEN or GREEN AND 
YELLOW.

The wires in the mains lead on this product are colored in accordance with 
the following code:

 

BLUE – NEUTRAL

 

BROWN – LIVE

As these colors may not correspond with the colored markings identifying 
the terminals in your plug, proceed as follows:

 

The BLUE wire must be connected to the terminal marked with the 
letter ‘N’ or colored BLACK.

 

The BROWN wire must be connected to the terminal marked with the 
letter ‘L’ or colored RED.

When replacing the fuse, only a correctly rated and approved type should 
be used, and be sure to re-fit the fuse cover.

if in doubt conSult a competent electrician.

noteS on environmental protection

At the end of its useful life, this product must not be disposed 
of with regular household waste but must be returned to a 
collection point for the recycling of electrical and electronic 
equipment. The symbol on the product, user’s manual and 
packaging, point this out.

The materials can be reused in accordance with their markings. Through 
re-use, recycling of raw materials or other forms of recycling of old 
products, you are making an important contribution to the protection of 
our environment. Your local administrative office can advise you of the 
responsible waste disposal point.

information about collection and diSpoSal of 
waSte batterieS (directive 2006/66/ec of the european 
parliament and the council of european union) (for 
european cuStomerS onlY)

Batteries bearing any of these symbols indicate 
that they should be treated as “separate collection” 
and not as municipal waste. It is encouraged that 
necessary measures are implemented to maximize 
the separate collection of waste batteries and 
to minimize the disposal of batteries as mixed 
municipal waste. 

End-users are exhorted not to dispose waste 
batteries as unsorted municipal waste. In order 

to achieve a high level of recycling waste batteries, discard waste batteries 
separately and properly through an accessible collection point in your 
vicinity. For more information about collection and recycling of waste 
batteries, please contact your local municipality, your waste disposal service 
or the point of sale where you purchased the items.

By ensuring compliance and conformance to proper disposal of waste 
batteries, potential hazardous effects on human health is prevented and 
the negative impact of batteries and waste batteries on the environment 
is minimized, thus contributing to the protection, preservation and quality 
improvement of the environment.  

note: the c 725bee iS not an auto voltage receiver. 
connect onlY to the preScribed ac outlet, i.e., 120v 60hz 
or 230v 50hz.

record Your model number (now, while You can See it)

The model and serial number of your new C 725BEE are located on the 
back of the cabinet. For your future convenience, we suggest that you 
record these numbers here:

 

Model no: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 

Serial no.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IMPORTANT SAFETY INSTRUCTIONS

NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited

Copyright 2008, NAD Electronics International, a division of Lenbrook Industries Limited

EN

G

LIS

H

FR

A

N

Ç

A

IS

ES

PA

Ñ

O

L

IT

A

LIA

N

O

D

EU

TS

CH

N

ED

ER

LA

N

D

S

SV

EN

SK

A

РУ

СС

К

И

Й

Summary of Contents for C 725BEE

























Reviews: