INTRODUCTION
GETTING STARTED
UNPACKING AND SETUP
WHAT’S IN THE BOX
Packed with your C 565BEE you will find:
•
An audio cable connector
•
The CD 9 remote control with two AA batteries
•
A detachable AC power cord
•
This owner’s manual (This owner’s manual version in CD-ROM).
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 565BEE
arrived. Should you move or otherwise need to transport your C 565BEE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the C 565BEE’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 565BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 565BEE on top of other components.
NOTE ON INSTALLATION
IMPORTANT! Install the C 565BEE Compact Disc player on a level, vibration-
free surface. Severe vibration or operation in a tilted position may cause
the player to mis-track. The player may be stacked with other stereo
components, as long as there is adequate ventilation around it. If the
C 565BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or
a television set, the operation of its digital circuits may produce static that
would interfere with reception of weak broadcast signals. If this occurs,
move the C 565BEE away from other devices or switch it off when viewing
or listening to broadcasts.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD C 565BEE, we provide the following “Quick Start” instructions to get
you underway.
Please make all the connections to your C 565BEE with the unit unplugged.
It is also advisable to power down or unplug all associated components
while making or breaking any signal or AC power connections.
PLAY A CD
1
Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line
Output jacks to the corresponding CD inputs on your amplifier.
2
Connect the AC cord to the C 565BEE’s AC Mains input and then plug
into an AC outlet. The Standby LED indicator embedded around the
bezel of the STANDBY button will illuminate amber.
3
Press the STANDBY button to turn ON the player. The Standby LED
indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD).
4
Press [STOP/OPEN] to open the disc drawer.
5
Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
6
Press [PLAY/PAUSE/SKIP]. The drawer closes automatically, and the disc
begins to play.
7
At any time you may rotate the [PLAY/PAUSE/SKIP] knob to select
different tracks on the disc.
8
Press [PLAY/PAUSE/SKIP] if you want to stop play temporarily while
keeping the pickup at its current position on the disc. Press [PLAY/
PAUSE/SKIP] again when you want to resume playback. Press [STOP/
OPEN] if you want to end play and reset the pickup to the beginning of
the disc.
6
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
