NAD M33, Owner'S Manual

ENGLISH

5

INTRODUCTION

GETTING STARTED

WHAT’S IN THE BOX 

Packed with your M33 you will find 

• 

Two detachable mains power cord 

• 

HTRM 2 remote control with 4 AA batteries

• 

Mic Assembly with Ferrite Base 

• 

USB MIC Sound Adaptor 

• 

USB flash drive 

• 

Four pieces of magnetic feet

• 

Cleaning cloth 

• 

Quick Setup Guide 

NOTE 

Follow supplied Quick Setup Guide to help you get started with your 
M33. 

SAVE THE PACKAGING 

Please save the box and the packaging that came with the M33. Should 
you move or need to transport your M33, this is the safest container to use. 
We’ve seen too many otherwise perfect components damaged in transit 
for lack of a proper shipping carton. So please, save that box! 

FACTORY RESET 

Factory Reset is recommended if your M33 is not functioning or internet 
firmware upgrade has failed. All customization including Wi-Fi network 
configuration, file shares and saved playlists or settings will be lost. They 
have to be re-created once factory reset is completed. 

M33 can be factory reset or restored to factory default settings using any of 
the following methods. 

1  Via Front Panel Display 

Go to 

Settings - Other

 menu option and select 

Factory Reset

 to initiate 

restoring of the M33 to factory default settings. Follow the prompt 
commands. 

2  Force Factory Reset 

a 

Press and hold rear panel RESET tact switch and while doing so, turn 
ON the rear panel POWER switch. Do not release hold of the RESET 
tact switch. 

b 

Hold down the RESET tact switch - STATUS INDICATOR (NAD logo) 
alternately blinks red and white.

c 

Release the RESET tact switch as soon as the front panel display 
shows “Factory Reset…” 

d 

Successful Factory Reset is indicated by the unit rebooting. 
-  For wireless connection, M33 returns to Hotspot mode and 
STATUS INDICATOR (NAD logo) indicator turns into solid white. 
-  For wired connection, M33 will simply connect as if it was a new 
player and NAD logo indicator turns into solid white. 

IMPORTANT 

Releasing the Standby button switch at any time before the STATUS 
INDICATOR (NAD logo) begins flashing red will cancel the factory reset 
and leave the M33 at Upgrade Mode. Just start again the procedure for 
Factory Reset.