background image

TRAINING MASTER FOR BLU-RAY (BD)

3. PICTURE  COLOR
 

3-1. No Color

 

The video displays no color and only shows in black and white.

What cables is the customer

using to connect the BD?

NO

YES

Determine what cables the customer is using to connect the BD 

to the TV and if connected properly. Refer to OM for connections. 

Tighten any loose cables. Make sure the customer is not connecting a 

BD to VCR. Copy protection can distort the picture on older VCR models.

Is the TV set to the 

correct input?

NO

YES

Make sure the TV is on the correct input according to the 

connections in use. Video when using composite, or component. 

DVI when using DVI, and HDMI when using HDMI.

Does color appear when

watching multiple discs?

NO

YES

One disc displaying the issue is a problem with the disc. 

Make sure the discs the customer is using are compatible with the 

BD by checking “playable discs” in the owners manual. 

Multiple discs displaying the problem indicates a problem with 

the BD player.

Does color appear when
watching a TV program?

NO

YES

If the cable or satellite programming is connected through 

another input and the customer does not get color, the customer has a 

problem with his television. If a TV program does have the color, 

the problem may be the BD player, the cables being used, 

or the TV itself.

Does color appear 

when the BD is

connected to another TV?

NO

YES

Connect the BD to another TV and play a disc. Good color during 

disc play  back indicates a problem with the first TV. Please refer to the 

owners manual for instructions on how to connect the BD to a TV. 

If the BD has a problem on the second TV, then see service chart for 

service information.

Has the customer tried

another set of cables?

NO

Have the customer try another set of cables. A bad cable can 

also cause video problems. Test the cable with another device to 

the TV to also determine if the TV is bad. If the BD is the problem, 

please see service chart for service information.

 3-12

Summary of Contents for M56






































































































Reviews: